Parameter Assignment; Parameterizing 3Rw55 And 3Rw55 Failsafe Soft Starters - Siemens SIRIUS 3RW55 Equipment Manual

Parameter assignment

6.1

Parameterizing 3RW55 and 3RW55 Failsafe soft starters

Operating principle
In the following example of a procedure, the 3RW55 or 3RW55 Failsafe soft starter is
parameterized in parameter set 1 with a 3RW5 HMI High Feature. The 3RW55 and 3RW55
Failsafe soft starters have 3 parameters sets (Page 91), e.g. to start applications with different
load conditions (e.g. conveyor belt full and conveyor belt empty). To set parameter sets 2 and 3,
proceed as described below. In the factory settings, parameter set 1 is active.
Note
Application wizard
To enable simple commissioning the 3RW5 HMI High Feature supports various applications with
an application wizard. In the menu, navigate to "Parameters > Soft Starter > Parameter set 1 / 2 /
3 > Application wizard". You will find more information in chapter Application wizard (Page 92).
Parameterization options
• 3RW5 HMI High Feature
You will find an overview of the menu in chapter Menu of the 3RW5 HMI High Feature
(Page 99).
3RW5 HMI High Feature is connected and ready for operation. Access protection to
3RW5 HMI High Feature is not active or has been reset.
• SIRIUS Soft Starter ES (TIA Portal) via the local interface on the 3RW5 HMI High Feature
Brief overview: Window "Project Navigation" with current project under created Soft Starter >
"Parameters" > Window "Work area" > "Soft Starter"
• With a fieldbus via a 3RW5 communication module:
– With SIRIUS Soft Starter ES (TIA Portal) Premium / Professional (only via a 3RW5 PROFINET
– Configuration software of the control system (e.g. STEP 7 with corresponding HSP)
– User program
You can find additional information on the parameters that can be set via the fieldbus in the
manual of the respective 3RW5 communication module.
Ex operation
Refer to chapters ATEX / IECEx (Page 16) and ATEX / IECEx (Page 206).
SIRIUS 3RW55 and 3RW55 Failsafe Soft Starters
Equipment Manual, 02/2022, A5E35630887002A/RS-AF/006
or PROFIBUS communication module)
Brief overview: See SIRIUS Soft Starter ES (TIA Portal) via the local interface on the
3RW5 HMI High Feature
6
89