Installing/Mounting; Basic Safety Instructions - Siemens SIPART PS2 Operating Instructions Manual

Installing/mounting

3.1

Basic safety instructions

High operating force with pneumatic actuators
Risk of injury when working on control valves due to the high operating force of the pneumatic
actuator.
• Please observe the corresponding safety instructions for the pneumatic actuator in use.
Lid gasket may be damaged
If the lid gasket is not positioned correctly in the groove of the base plate, it could be damaged
when the lid is mounted and screwed tight.
• Therefore, make sure that the lid gasket is seated correctly.
Exceeded maximum permissible operating pressure
Risk of injury or poisoning.
The maximum permissible operating pressure depends on the device version, pressure limit
and temperature rating. The device can be damaged if the operating pressure is exceeded. Hot,
toxic and corrosive process media could be released.
Ensure that maximum permissible operating pressure of the device is not exceeded. Refer to
the information on the nameplate and/or in Technical data (Page 57).
Electrostatic charging of nameplates
The nameplates used on the device can reach a capacity of 5 pF.
• Keep the device and the cables at a distance from strong electromagnetic fields.
SIPART PS2 (6DR5...)
Compact Operating Instructions, 11/2022, A5E03436620-AG
WARNING
WARNING
WARNING
WARNING
3
17