Device Change" Function - Siemens SIRIUS 3RW55 Equipment Manual

Resetting of ex-relevant parameters to the factory setting.
Will cause death or serious injury.
Ex-relevant parameters are deleted on restoration of the factory setting.
Restoration of the factory setting with active Ex operation (Page 207) is only permissible via the
master RESET button on the 3RW5 HMI High Feature. After restoration of the factory setting,
you have to parameterize the 3RW55 or 3RW55 Failsafe soft starter again for use in Class I and
Class II Hazardous Locations. You will find further information on parameterization of the
3RW55 and 3RW55 Failsafe soft starters for use in Class I and Class II Hazardous Locations in
chapter ATEX / IECEx (Page 206).
Procedure
1. Press the Master RESET key on the rear of the 3RW5 HMI High Feature.
The menu for restoring the factory setting appears on the display.
2. Select the desired menu item.
– Soft starter
– Communication module
– HMI High Feature
– All devices
3. Confirm the menu item by pressing the OK key.
Result
The factory setting of the selected device or all devices is restored.
Note the effects of the factory settings (Page 278).
10.6

"Device change" function

Hazardous voltage.
Can cause death or serious injury.
The present device/part conducts hazardous voltages.
Touching live components will result in death or severe injury.
Installation, commissioning, and maintenance only by qualified specialist personnel.
The device replacement is only permissible by qualified personnel.
SIRIUS 3RW55 and 3RW55 Failsafe Soft Starters
Equipment Manual, 02/2022, A5E35630887002A/RS-AF/006
DANGER
WARNING
Maintenance and service
10.6 "Device change" function
281