Installing/Removing The Covers On The C-Arm Mounting - Siemens ARCOSKOP Troubleshooting Manual

1 - 8
rods remain in one half of the two covers in order to keep the space required for pulling
the halves apart small.

Installing/removing the covers on the C-arm mounting

•
Remove the cover screws and remove both covers towards the side (Fig. 5).
•
After completing the procedure, reinstall both covers in the reverse order.
ARCOSKOP
System Manual
SPR2-250.840.01
Rev. 01 09.05
Prerequisites
Seite 8 von 16
CS PS 24
1
Siemens AG
Medical Solutions