Siemens SIRIUS 3RW55 Equipment Manual page 147

Setting options
• 3RW5 HMI High Feature
Menu: "Parameters > Soft Starter > Parameter set 1 / 2 / 3 > Stopping mode settings >
Stopping mode"
Access protection to the 3RW5 HMI High Feature is not active or has been reset.
• With SIRIUS Soft Starter ES (TIA Portal) via the local interface on the 3RW5 HMI High Feature
Brief overview: Window "Project Navigation" with current project under created Soft Starter >
"Parameters" > Window "Work area" > "Soft Starter > Parameter set 1 / 2 / 3 > Stopping mode
settings"
• With a fieldbus via a 3RW5 communication module:
– With SIRIUS Soft Starter ES (TIA Portal) Premium / Professional (only via a 3RW5 PROFINET
– Configuration software of the control system (e.g. STEP 7 with corresponding HSP)
– User program
You can find additional information on the parameters that can be set via the fieldbus in the
manual of the respective 3RW5 communication module.
Stopping modes of the 3RW55 and 3RW55 Failsafe soft starters
• Coasting down (Page 148)
(Factory setting)
• Voltage ramp (Page 149)
• Torque control (Page 150)
• Pump stop (Page 152)
• DC braking with external braking contactors (Page 154)
This stopping mode is not available for the 3RW55 Failsafe soft starter.
• Dynamic DC braking without contactor (Page 157)
This stopping mode is not available for the 3RW55 Failsafe soft starter.
• Reversing DC braking with a reversing contactor assembly (Page 160)
This stopping mode is not available for the 3RW55 Failsafe soft starter.
• Alternative stopping (Page 163)
SIRIUS 3RW55 and 3RW55 Failsafe Soft Starters
Equipment Manual, 02/2022, A5E35630887002A/RS-AF/006
or PROFIBUS communication module)
Brief overview: See SIRIUS Soft Starter ES (TIA Portal) via the local interface on the
3RW5 HMI High Feature
Functions
8.2 Run-down
147