Siemens SIRIUS 3RW55 Equipment Manual page 66

Mounting and dismantling
4.4 Installing, mounting and removing the 3RW5 HMI High Feature
Procedure with IP65 door mounting kit
• Remove the protective film from the adhesive tape on the seal and secure the seal on the rear
side of the 3RW5 HMI High Feature
Ensure that the seal does not overlap.
• Place the 3RW5 HMI High Feature in the cutout of the control cabinet door
66
①
.
SIRIUS 3RW55 and 3RW55 Failsafe Soft Starters
Equipment Manual, 02/2022, A5E35630887002A/RS-AF/006
②
.