Siemens SIRIUS 3RW55 Equipment Manual page 104

Parameter assignment
6.7 Menu of the 3RW5 HMI High Feature
- Select parameter set
∟ Parameter set 1
∟ Parameter set 2
∟ Parameter set 3
1)
- Local / Remote
- Control motor
∟ Motor CW
∟ Motor CCW
∟ Stop motor
∟ Enable / Disable creep speed
∟ Enable / Disable alternative stopping mode
∟ Pump cleaning start / stop
- Reset
- Enable / Disable Quick-stop
- Enable / Disable Emergency start
- Enable / Disable emergency run
- Test mode
∟ Activate / Deactivate test with small load
∟ Activate / Deactivate simulation
- Enable / Disable PIQ-DQ Bit 1.0
- Enable / Disable PIQ-DQ Bit 1.1
- Enable / Disable PIQ-DQ Bit 2.0
Display depends on the current setting
1)
3RW5 HMI High Feature from firmware version V2.0
2)
3) 3RW5 HMI High Feature from firmware version V3.0
104
1)
1)
1), 2)
1)
1)
1), 3)
1)
1), 2)
1)
1)
1)
Additional information
Control [1/1]
Equipment Manual, 02/2022, A5E35630887002A/RS-AF/006
SIRIUS 3RW55 and 3RW55 Failsafe Soft Starters