Siemens SIRIUS 3RW55 Equipment Manual page 90

Parameter assignment
6.1 Parameterizing 3RW55 and 3RW55 Failsafe soft starters
Failsafe
Refer to chapters Failsafe (Page 20) and Failsafe (Page 212).
Requirements
• The 3RW55 or 3RW55 Failsafe soft starter is mounted and connected.
• Supply voltage (control supply voltage) is present.
Procedure for parameterization on the 3RW5 HMI High Feature
Set the desired parameters depending on the selected application. You will find an overview of
the menu of the 3RW5 HMI in chapter Menu of the 3RW5 HMI High Feature (Page 99).
1. Set the motor parameters (Page 95).
Menu: "Parameters > Soft Starter > Parameter set 1 / 2 / 3 > Motor parameters"
2. Set the start parameters (Page 131).
Menu: "Parameters > Soft Starter > Parameter set 1 / 2 / 3 > Start settings"
Alternatively, use automatic parameterization (Page 132).
Menu: "Parameters > Soft Starter > Parameter set 1 / 2 / 3 > Automatic parameterization"
3. Set the stopping mode parameters (Page 146).
Menu: "Parameters > Soft Starter > Parameter set 1 / 2 / 3 > Stopping mode settings"
4. Set the motor protection (Page 166).
Menu: "Parameters > Soft Starter > Parameter set 1 / 2 / 3 > Motor protection"
5. Set creep speed (Page 172).
Menu: "Parameters > Soft Starter > Parameter set 1 / 2 / 3 > Creep speed"
The function is not available for the 3RW55 Failsafe soft starter.
6. Set the condition monitoring parameters (Page 174).
Menu: "Parameters > Soft Starter > Parameter set 1 / 2 / 3 > Condition Monitoring"
7. Set the asymmetry monitoring parameters (Page 186).
Menu: "Parameters > Soft Starter > Asymmetry"
8. Set ground fault monitoring (Page 187).
Menu: "Parameters > Soft Starter > Ground fault"
9. Set the emergency start (Page 189).
Menu: "Parameters > Soft Starter > Emergency start"
10.Set emergency run (Page 191).
Menu: "Parameters > Soft Starter > Emergency run"
The "Emergency run" function is not available for the 3RW55 Failsafe soft starter.
11.Set the inputs (Page 194).
Menu: "Parameters > Soft Starter > Inputs"
12.Set the outputs (Page 198).
Menu: "Parameters > Soft Starter > Outputs"
13.Set the additional parameters (Page 214).
Menu: "Parameters > Soft Starter > Additional parameters"
90
SIRIUS 3RW55 and 3RW55 Failsafe Soft Starters
Equipment Manual, 02/2022, A5E35630887002A/RS-AF/006