Mercedes-Benz S-Class 2020 Owner's Manual page 500

Hide thumbs Also See for S-Class 2020:
Table of Contents

Advertisement

Mercedes-Benz recommends that you have the
oil change carried out at a qualified specialist
workshop.
Only use engine oils approved by Mercedes-
Benz.
Petrol engines: For certain countries, different
engine oils can be used in conjunction with
reduced maintenance intervals.
%
Further information on different engine oils
can be obtained at a qualified specialist
workshop.
Quality and capacity of engine oil
MB-Freigabe or MB-Approval (petrol engines)
Model
Engine oil specifica‐
S 500 4MATIC
229.51, 229.52,
S 580 4MATIC
MB-Freigabe or MB-Approval (diesel engines)
Model
S 350 d
S 350 d 4MATIC
S 400 d 4MATIC
* recommended for lowest possible fuel con‐
sumption (lowest SAE viscosity class in each
case; observe possible restrictions of the
approved SAE viscosity classes)
To achieve the lowest possible fuel consumption,
it is recommended to use the engine oil specifi‐
cations marked in the table for the lowest SAE
viscosity class. Possible restrictions of the
tions
approved SAE viscosity classes must be
observed.
%
If the engine oils listed in the table are not
229.61
available, you may add a maximum of
229.71*
1.0 litre of the following engine oils once
only.
229.52
229.61*
Engine oils for one-time filling only in exceptional
cases:
Engine oil specifica‐
petrol engines:
tions
R
-
229.52
229.61*
-
diesel engines: MB-Freigabe or MB-Approval
R
229.51 or ACEA C3
The following values refer to an oil change,
including the oil filter.
Model
S 350 d
S 580 4MATIC
All other models
Notes on brake fluid
Observe the notes on operating fluids
(
page 491).
/
Technical data 497
S 580 4MATIC: MB-Freigabe or MB-
Approval 229.51 or ACEA C3
S 500 4MATIC: MB-Freigabe or MB-
Approval 229.31 or ACEA C3
Capacity
9 litres
8.5 litres
8 litres

Advertisement

Table of Contents
loading

Table of Contents