Mercedes-Benz S-Class 2020 Owner's Manual page 247

244 Driving and parking
To activate with a stored speed: press
#
J. Active Distance Assist DISTRONIC:
remove your foot from the accelerator pedal.
The last stored speed is called up and the
vehicle maintains this speed (Active Distance
Assist DISTRONIC) or does not exceed it (var‐
iable limiter).
If the stored speed has been deleted, the
current vehicle speed is stored.
% When you switch off the vehicle, the stored
speed is deleted. When you activate Active
Distance Assist DISTRONIC, the last speed
stored for the variable limiter is deleted.
Increasing or reducing the speed
To increase the stored speed: swipe upwards
#
from the bottom of control panel 1.
The stored speed is increased by 1 km/h.
R
To decrease the stored speed: swipe down‐
#
wards from the top of control panel 1.
The stored speed is decreased by
R
1 km/h.
or
Briefly press M or N on the lower sec‐
#
tion of control panel 1.
The stored speed is increased or reduced by
10 km/h.
or
Press and hold M on the upper section or
#
N on the lower section of control panel
1.
The stored speed is increased or reduced in
increments of 10 km/h.
or
Accelerate the vehicle to the desired speed.
#
Press M on the upper section of control
#
panel 1.
Adopting the limit speed shown in the driver
display
Activate Active Distance Assist DISTRONIC
#
or the variable limiter.
Press J.
#
The limit speed displayed in the driver display
is adopted as the stored speed. The vehicle
adapts its speed to that of the vehicle in
front, but only up to the stored speed, or lim‐
its its speed accordingly.
Pulling away with Active Distance Assist
DISTRONIC
Activate Active Distance Assist DISTRONIC
#
and remove your foot from the brake pedal.
Press J.
#
or
Depress the accelerator pedal briefly and
#
firmly.
The functions of Active Distance Assist
DISTRONIC continue to be carried out.
Reducing or increasing the specified dis‐
tance from the vehicle in front
Press K.
#
The Ò display appears under the ç
status display.
The specified distance is reduced by one
level.
If the lowest level is already selected, the
selection jumps to the highest level.