Mercedes-Benz S-Class 2020 Owner's Manual page 408

* NOTE Vehicle damage from the jack
If you do not position the jack correctly at
the appropriate jack support point of the
vehicle, the jack could tip over with the vehi‐
cle raised.
The jack is designed exclusively for
#
jacking up the vehicle at the jack sup‐
port points.
Take the ratchet ring spanner out of the tyre-
#
change tool kit and place it on the hexagon
nut of the jack so that the letters "AUF" are
visible.
Position support 2 of jack
#
port point 1.
Turn ratchet ring spanner 3
#
jack support 2 sits completely on jack sup‐
port point 1 and the base of the jack lies
evenly on the ground.
Continue to turn ratchet ring spanner
#
until the tyre is raised a maximum of 3 cm
off the ground.
Loosen and remove the wheel (
#
Removing a wheel
Requirements:
The vehicle is raised.
R
When changing a wheel, avoid applying any force
to the brake discs, as this could impair the level
of comfort when braking.
* NOTE Damage to threading from dirt on
wheel bolts
Do not place wheel bolts in sand or on
#
a dirty surface.
4 on jack sup‐
Unscrew the uppermost wheel bolt com‐
#
pletely.
clockwise until
3
Wheels and tyres 405
page 405).
/