Mercedes-Benz S-Class 2020 Owner's Manual page 309

306 Driver display
System limits
Route guidance with augmented reality is not
available in some situations, e.g. in the event of
poor satellite reception or roads that have not
been digitised.
Visibility is influenced by the following condi‐
tions:
Driver camera and multifunction camera
R
recording
The extent to which the windscreen in the
R
area of the multifunction camera is dirty, or if
the camera is misted up, damaged or
obscured.
Further system limits of the head-up display
( page 304).
/
Operating the head-up display
Selecting display content of the head-up dis‐
play via the menu bar of the driver display
Press the ò main menu button on the
#
left.
To select the menu bar of the head-up dis‐
#
play: swipe upwards on the left-hand Touch-
Control.
To switch between types of display con‐
#
tent on the head-up display: swipe to the
left or right on the left-hand Touch Control.
The head-up display shows a preview of the
selected display contents after each swipe.
Press the a button to confirm the desired
#
content.
Switching back to the driver display
Press the G or ò button.
#
Setting the position and brightness
On the menu bar of the head-up display,
#
select the Settings menu by swiping to the
left or right.
Press the left-hand Touch Control.
#
The current position and brightness settings
will be displayed graphically on the head-up
display as well as on the driver display.
To adjust the position: swipe upwards or
#
downwards on the left-hand Touch Control.
To adjust the brightness: swipe to the right
#
or left on the left-hand Touch Control.
The settings configured for position and
brightness will be saved automatically.
Press the G or a button to exit the
#
settings.
Vehicles with augmented reality func‐
%
tion: when the position is adjusted, the sta‐
tus bar will be moved upward and the display
area reduced. This may impair visibility of
the augmented reality slightly.