Cup Holders - Mercedes-Benz S-Class 2020 Owner's Manual

152 Seats and stowing
Depending on the vehicle equipment,
#
ensure that when the roof luggage rack
is fitted, the boot lid can be fully
opened.
Position the load on the roof luggage
#
rack in such a way that the vehicle will
not sustain damage even when it is in
motion.
* NOTE Damage to panorama sliding sun‐
roof caused by roof luggage rack
If the panorama sliding sunroof is opened
when a roof luggage rack is fitted, the pano‐
rama sliding sunroof may be damaged by the
roof luggage rack.
Do not open the panorama sliding sun‐
#
roof if a roof luggage rack is fitted.
* NOTE Damage to the covers
The covers may be damaged and scratched
when being opened.
Do not use metallic or hard objects.
#
Carefully fold covers 1 upwards in the
#
direction of the arrow.
Secure the roof luggage rack to the fastening
#
points beneath covers 1.
Comply with the installation instructions of
#
the roof luggage rack manufacturer.
Secure the load on the roof luggage rack.
#

Cup holders

Switching the cooling or heating function for
the temperature-controlled cup holder on or
off
When the heating function is used, the metal
insert of the cup holder is heated. For this rea‐
son, you must not reach into the cup holder
insert.
When placing glasses in the temperature-con‐
trolled cup holder, do not close the cover of the
stowage compartment in the rear centre console
because the glasses may tip over.