Mercedes-Benz S-Class 2020 Owner's Manual page 217

Hide thumbs Also See for S-Class 2020:
Table of Contents

Advertisement

214 Driving and parking
release the brake pedal.
#
Switch the ignition off.
#
The
Risk of vehicle rolling away N activated man-
ually No automatic switch to P
on the driver's display.
%
If you then exit the vehicle leaving the key in
the vehicle, the automatic transmission
remains in neutral i.
The park position j is automatically re-engaged
as soon as one of the following conditions is
met:
you switch to transmission position h or
R
k.
you press the button j.
R
Engaging park position P
Observe the notes on parking the vehicle
#
(
page 223).
/
Depress the brake pedal until the vehicle
#
comes to a standstill.
When the vehicle is at a standstill, press but‐
#
ton j.
When the transmission position display
shows j, the park position is engaged. If no
message appears
transmission position display j appears,
secure the vehicle to prevent it from rolling
away.
%
Depending on the situation, it may take a
short time until j is engaged. Therefore,
always pay attention to the transmission
position display.
Park position j is engaged automatically if one
of the following conditions is met:
you switch off the ignition when the vehicle
R
is stationary and the transmission position is
h or k.
you open the driver's door when the vehicle
R
is at a standstill or when driving at a very low
speed and the transmission position is h or
k.
you switch off the engine and bring the vehi‐
R
cle to a standstill when the vehicle is rolling
and the transmission position is h or k.
you switch off the engine, bring the vehicle
R
to a standstill and open the driver's door
when the vehicle is stationary or when the
vehicle is rolling and the transmission posi‐
tion is i.
engaging park position j automatically is
R
required by the vehicle.
%
To manoeuvre with an open driver's door,
open the driver's door while at a standstill
and engage transmission position h or k
again.
Engaging drive position D
Depress the brake pedal and push the
#
DIRECT SELECT lever down past the first
point of resistance.
When the automatic transmission is in transmis‐
sion position h, it shifts the gears automati‐
cally. This depends, among other things, on the
following factors:
the selected drive program
R
the position of the accelerator pedal
R
the driving speed
R

Advertisement

Table of Contents
loading

Table of Contents