Mercedes-Benz S-Class 2020 Owner's Manual page 176

Control panel inside the grab handle (rear)
1 p Reading lamp on the respective side of
the vehicle
2 u Rear interior lighting
To switch reading lamps on: press button
#
1.
The reading lamp, the interior lighting in the
grab handle and the dome lamp on the
respective side of the vehicle will light up.
To switch reading lamps off: press button
#
1 once or twice.
After pressing it once, the interior lighting in
the grab handle and the dome lamp on the
respective side of the vehicle will go out.
After pressing it twice, the reading lamp on
the respective side of the vehicle will go out.
To switch the rear interior lighting on/
#
off: press button 2.
The reading lamps, the interior lighting in the
grab handle and the dome lamps on both
sides of the vehicle will light up or go out.
Adjusting the ambient lighting
Multimedia system:
© Settings Comfort
4 5 5
Ambient lighting
5
Setting the colour
Select Colour.
#
Select Monochrome or Multi-colour.
#
Set the desired colour or colour combination.
#
Light and sight 173
Adjusting the brightness
Select Brightness.
#
Adjust the brightness.
#
% Depending on the ambient light conditions,
the ambient lighting will automatically switch
between day and night modes.
Activating the brightness for zones
Select Brightness.
#
Switch off Link zones .
#
The Direct, Indirect and Accent
set separately.
% The Light band zone can also be set for vehi‐
cles with active ambient lighting.
Activating effects
& WARNING Risk of an accident despite
activated effects of ambient lighting and
active ambient lighting
To use the Warning Assistance effects, the
respective functions must be activated in the
driver assist menu.
zones can be