Mercedes-Benz S-Class 2020 Owner's Manual page 168

Operating the combination switch for the
lights
1 High beam
2
Turn signal light, right
3 Headlamp flashing
4 Turn signal light, left
Use the combination switch to activate the
#
desired function.
Switching on high beam
Turn the light switch to the L or Ã
#
position.
Push the combination switch in the direction
#
of arrow 1.
When the high beam is activated, the indica‐
tor lamp for low beam L will be deactiva‐
ted and replaced by the indicator lamp for
high beam K.
Switching off high beam
Push the combination switch in the direction
#
of arrow 1 or pull it in the direction of arrow
3.
Headlamp flashing
Pull the combination switch in the direction
#
of arrow 3.
Turn signal light
To indicate briefly: push the combination
#
switch briefly to the point of resistance in the
direction of arrow 2 or 4.
The corresponding turn signal light will flash
three times.
Light and sight 165
To indicate permanently: push the combi‐
#
nation switch beyond the point of resistance
in the direction of arrow 2
Vehicles with Active Lane Change Assist:
A turn signal indicator activated by the
R
driver may continue to operate for the
duration of the lane change.
If the driver indicated directly beforehand
R
but a lane change was not immediately
possible, the turn signal indicator may
activate automatically.
or 4.