Mercedes-Benz S-Class 2020 Owner's Manual page 131

128 Seats and stowing
Attaching and removing the additional cush‐
ion of the head restraint in the rear compart‐
ment (individual seats)
Position head restraint 2 as far forwards as
#
possible.
To attach the additional cushion: open Vel‐
#
cro strip 4 on the rear of additional cushion
1.
Guide Velcro strip 4 between head restraint
#
2 and strip 3.
Close Velcro strip 4.
#
Change the position of the additional
#
cushion: move additional cushion
down.
To remove additional cushion: open Velcro
#
strip 4 of additional cushion 1.
Remove additional cushion 1.
#
Attaching heated additional cushion
In vehicles with electrically adjustable head
restraints, you can heat the additional cushion.
Attach the additional cushion to the head
#
restraint as described.
Move the head restraint to the very top.
#
1 up or
Push press-studs
#
into counterpieces
Move the head restraint to the desired
#
height.
To switch neck heating from the addi‐
#
tional cushion on/off: make sure that
press-studs 2
correctly pushed into counterpieces
the head restraint.
Ensure that the "Couple neck heat to seat
#
heating" function is active (
Activate or deactivate the seat heating
#
( page 132).
/
2 on the additional strip
1 on the head restraint.
on the additional strip are
1 on
page 129).
/