Mercedes-Benz S-Class 2020 Owner's Manual page 271

Hide thumbs Also See for S-Class 2020:
Table of Contents

Advertisement

268 Driving and parking
If a loss of tyre pressure or a defective tyre
R
has been detected and displayed.
The system may be impaired or may not function
particularly in the following situations:
If there is poor visibility, e.g. due to insuffi‐
R
cient illumination of the road, if there are
highly variable shade conditions or in rain,
snow, fog or heavy spray.
If there is glare, e.g. from oncoming traffic,
R
the sun or reflections.
If the windscreen in the area of the multi‐
R
function camera is dirty, or if the camera is
misted up, damaged or covered.
If there are no lane markings, or several
R
unclear lane markings are present for one
lane, e.g. around roadworks.
If the lane markings are worn, dark or cov‐
R
ered.
If the distance to the vehicle in front is too
R
short and thus the lane markings cannot be
detected.
If the lane markings change quickly, e.g.
R
lanes branch off, cross one another or
merge.
If the carriageway is very narrow and wind‐
R
ing.
Observe the notes on driving systems and your
responsibility; you may otherwise fail to recog‐
nise dangers (
page 230).
/
Activating/deactivating Active Lane Keeping
Assist
Multimedia system:
©
Settings
Assistance
4
5
5
Avoid collision
5
Active Lane Keeping Assist
5
Switch the function on or off.
#
Alternatively, Active Lane Keeping Assist can be
activated and deactivated in the Assistance
menu.
%
After starting the engine, the settings are
country-specific.
Setting Active Lane Keeping Assist
Multimedia system:
©
Settings
Assistance
4
5
5
Avoid collision
5
Active Lane Keeping Assist
5
Setting the sensitivity
Select ´.
#
Select Early,
Med.
or Late.
#
The last selected setting will be adopted the next
time the engine is started.
%
The standard setting for this function is
dependent on the country.
Activating or deactivating assistance on dis‐
continuous lane markings
Select
Advanced
support.
#
The last selected setting will be adopted the next
time the engine is started.
%
The standard setting for this function is
dependent on the country.

Advertisement

Table of Contents
loading

Table of Contents