Programming Via Simatic Controller - Siemens SIMATIC RF166C Operating Instructions Manual

Programming via SIMATIC controller

This section is intended only for S7 users.
You can program and configure the SIMATIC RF166C communication modules using Ident
instructions via a SIMATIC controller.
To configure Ident systems using STEP 7 Basic / Professional (TIA Portal), you need
appropriate Ident instructions. The Ident profile and the Ident blocks are integrated in STEP
7 as of version V13.1.
You can find a detailed description of the Ident profile and the Ident blocks in the "Ident
profile and Ident blocks (https://support.industry.siemens.com/cs/ww/en/ps/14970/man)"
function manual.
SIMATIC RF166C
Operating Instructions, 12/2019, C79000-G8976-C578-01
8
97