Siemens SIMATIC RF166C Operating Instructions Manual page 103

OPC UA variables (read only)
AntennaNames
AutoIdModelVersion
DeviceInfo
DeviceLocationName
DeviceManual
DeviceName
DeviceRevision
DeviceStatus
HardwareRevision
LastScanData
Manufacturer
Model
RevisionCounter
SerialNumber
SoftwareRevision
Refer to the "OPC Unified Architecture for AutoID" specification for a more detailed
description of the methods/functions.
You can refer to the XML device description file "SimaticIdent.RFxxxx.xml" supplied with
each communication module for the IDs of the nodes described here. An XML device
description file is stored on the communication module and can be downloaded via the WBM
("System > Device description file"). Alternatively, you can also find the node IDs through
browsers by means of a generic OPC UA client through the address area of the server.
Additional functions
The integrated OPC UA servers of the communication modules offer additional functions and
diagnostic options as a supplement to the AutoID standard. The following table provides an
overview of the additional functions. The individual elements are described in greater detail
below the table.
Table 9- 3 Additional functions
OPC UA events
AutoIdDiagnosisEvent
RfidLastAccessEvent
AutoIdLastLogEntryEvent
AutoIdPresenceEvent
SIMATIC RF166C
Operating Instructions, 12/2019, C79000-G8976-C578-01
Antennas of read point
Version of the supported AutoID model
Information on the communication module (e.g. information on the device)
Information on the communication module (e.g. information on the location)
URL to the manual for the communication module
DisplayName of the read point
Reserved
Device status of read point
Hardware version of the communication module
Most recently scanned transponder of the read point (Scan, ScanStart).
Manufacturer (always "Siemens AG")
Variant of the communication module
Always "-1"
Serial number of the communication module
Software version of the communication module
Diagnostic events for the communication module
Event for the last transponder access
Event for the last log entry
Event for the presence of transponders
Programming via OPC UA
9.1 Supported methods/functions
103