Table of Contents
Advertisement
Configuration using the WBM
7.3 The menu items of the WBM
● Device clock
● Configuration display
Figure 7-4
The "Start page" menu item
Device-specific information
The first area contains device-specific information. The "Device type", "MLFB", "Hardware"
and "Serial number" boxes are specified in the factory. The content of the "Firmware" and
"Firmware version" boxes depends on the firmware stored on the communication module.
Using the "Update firmware" link, you jump to the "System" menu item in which you can
update firmware. The "Configuration ID" box contains a unique identifier for the configuration
that was last activated on the communication module or loaded into the communication
module. Click the "Default configuration" button to reset the parameters shown in the user
interface to the default values. When you restore the default configuration, address
information (IP address, device name) is retained.
Project ID
The second area contains text boxes that you can use to store your own device-specific
information in the communication module. Among other things, these should help you to
more easily identify the individual communication modules.
62
Operating Instructions, 12/2019, C79000-G8976-C578-01
SIMATIC RF166C
Advertisement
Table of Contents
