Siemens SIMATIC RF166C Operating Instructions Manual page 120

Hide thumbs Also See for SIMATIC RF166C:
Table of Contents

Advertisement

Programming via OPC UA
9.3 OPC UA events
Table 9- 30
Data type
Description
Possible values
Table 9- 31
Data type
Description
Possible values
Table 9- 32
Data type
Description
Possible values
Table 9- 33
Data type
Description
Possible values
120
CodeType
CodeTypeDataType
Shows the set format of the "Identifier" as String.
Timestamp
UtcTime
Time of the last transponder access
Example:
2018-05-29T08:29:15.812Z
RWData
ScanData
This is a union with the possible types for "RWData". The types
"String", "ByteString" and "ScanDataEpc" are supported. The
used data type is defined or set via the "CommonSettings > Co-
deTypesRWData" variable.
Read/written data of the last command
Only possible with commands for reading/writing the transponder
memory.
Example (RF300 reader, data type string):
0011223344556677
CodeTypeRWData
CodeTypeDataType
Shows the set format of "RWData" as String.
RAW:BYTES
RAW:STRING
EPC
RAW:BYTES
RAW:STRING
EPC
Operating Instructions, 12/2019, C79000-G8976-C578-01
SIMATIC RF166C

Advertisement

Table of Contents
loading

Table of Contents