Table of Contents
Advertisement
Configuration using the WBM
7.3 The menu items of the WBM
7.3.2
The "Settings - General" menu item
The "Settings - General" menu item is divided into the following area:
● Log settings
Figure 7-5
The "Settings - General" menu item
Log settings
In the "Log settings" area, you can use the check boxes to decide which events are entered
in the log. The log is structured as a circular buffer. Bear in mind that with a high degree of
detail of the data, the circular buffer fills up more quickly which can have a negative effect on
the performance of the device.
Table 7- 3
Parameter
General
COMMON
ERRORS
EVENTS
COMMANDS
Additional information
Return value
Call parameters
Status telegrams
64
Description of the parameters of the log
Description
Messages relating to general events:
e.g. reader startup, login to the WBM, ...
Errors and alarm messages of the communications module
Recording of all tag events
Commands of the user application
Return values for the commands of the user application
Call parameters for the commands of the user application
Recording status commands in PLC communication. Can be switched off if the
status commands are used as cable monitoring. In this way, the logbook is
kept free for user data.
Operating Instructions, 12/2019, C79000-G8976-C578-01
SIMATIC RF166C
Advertisement
Table of Contents
