Siemens SIMATIC RF166C Operating Instructions Manual page 93

● HTTPS certificate
● Device description files
Figure 7-16 The menu command "System - System settings"
Firmware update
In the "Firmware update" area, you can update the firmware of the communication module.
For a detailed description of firmware updates, refer to the section Firmware update
(Page 145).
Reset
In the "Reset" area, you can reset the communication module to the factory settings. When
you reset the communication module, all set configuration data, settings of the user
management and address information are lost.
To reset the communication module to the factory settings, click the "Reset" button. After the
reset, the communication module is automatically restarted. Note that, after this, you need to
assign a new IP address to the communication module.
If you lose your administrator password, you must reset the communication module to the
factory settings as described in the section "Restoring the factory settings manually
(Page 151)".
SIMATIC RF166C
Operating Instructions, 12/2019, C79000-G8976-C578-01
Configuration using the WBM
7.3 The menu items of the WBM
93