Table of Contents
Advertisement
Configuration using the WBM
7.1 Starting WBM
Procedure
Proceed as follows to start the WBM:
1. Start your Web browser.
2. Enter the IP address of the communication module in the address field of your browser.
3. Confirm your entry by pressing the <Enter> key.
Result: WBM of the communication module opens.
Alternatively, you can also open the WBM from the TIA Portal.
Figure 7-2
The start page of the WBM
56
Operating Instructions, 12/2019, C79000-G8976-C578-01
SIMATIC RF166C
Advertisement
Table of Contents
