Table of Contents
Advertisement
7.3.12
The menu command "System - Reader firmware"
In the "System - Reader Firmware" menu item, you can update the firmware of the readers
connected to the communication module.
● Basic settings
● Firmware update
Figure 7-17
The menu command "System - Reader firmware"
Basic settings
In this area, you can use the "Reader interfaces" parameter to specify the reader for which a
firmware update is to be performed. Depending on the connected reader, you can select the
desired reading point.
Firmware update
In the "Firmware update" area, you can update the firmware of the selected reader. For a
detailed description of firmware updates, refer to the section "Firmware update (Page 145)".
7.3.13
The "Help" menu item
Service and Support
The "Help - Service and Support" menu item includes information on the RF166C
communication modules, the WBM as well as links to the relevant documents and the
Siemens Industry Online Support.
Operating Instructions
With the "Help - Operating Instructions" menu item, you can find the corresponding
"SIMATIC RF166C" manual for the reader.
SIMATIC RF166C
Operating Instructions, 12/2019, C79000-G8976-C578-01
Configuration using the WBM
7.3 The menu items of the WBM
95
Advertisement
Table of Contents
