Siemens SIMATIC RF166C Operating Instructions Manual page 111

Table 9- 14
Path
Data type
Access
Description
Possible values
Table 9- 15
Path
Data type
Access
Description
Possible values
SIMATIC RF166C
Operating Instructions, 12/2019, C79000-G8976-C578-01
OPC UA:
•
•
•
•
•
•
•
•
•
Identifier
Root/Objects/DeviceSet/Read_point_x/RuntimeParameters/Diag
nosis/LastAccess/Identifier
Defined as "BaseDataType"
The actual data type is defined during runtime by the "Code-
Types" variable. The types "String", "ByteString" and "ScanDa-
taEpc" are supported.
R
Diagnostics on the last transponder access
Outputs the UID or EPC of the transponder that was accessed
with the last command.
The prerequisite is that the "Parallel" or "Diagnostics" option is
set in the WBM.
Example (RF300 reader, data type string):
000000005575B67D
Timestamp
Root/Objects/DeviceSet/Read_point_x/RuntimeParameters/Diag
nosis/LastAccess/Timestamp
UtcTime
R
Diagnostics on the last transponder access
Outputs the time of the last transponder access.
The prerequisite is that the "Parallel" or "Diagnostics" option is
set in the WBM.
Example:
2018-05-29T08:29:15.812Z
Scan
ScanAsync
ReadTag
WriteTag
KillTag
LockTag
SetTagPassword
Read
Write
Programming via OPC UA
9.2 OPC UA variables
WBM:
readTagIDs
•
asyncReadTagIDs
•
writeTagID
•
readTagMemory
•
writeTagMemory
•
killTag
•
lockTagBank
•
getTagStatus
•
111