Programming Via Simatic Controller - Siemens SIMATIC Ident Operating Instructions Manual
Hide thumbs
Also See for SIMATIC Ident:
- System manual (362 pages) ,
- Function manual (142 pages) ,
- Operating manual (80 pages)
Table of Contents
Advertisement
4.4
Programming via SIMATIC controller
You can program and configure the SIMATIC RF120C communications modules using Ident
instructions via a SIMATIC controller.
To configure Ident systems using STEP 7 Basic / Professional (TIA Portal), you need
appropriate Ident instructions. The Ident library with the Ident profile and the Ident blocks is
integrated in STEP 7 as of version V13. You can find a detailed description of the Ident profile
and the Ident blocks in the "Ident profile and Ident blocks, standard function for Ident
systems (https://support.industry.siemens.com/cs/ww/en/view/109781633)" function manual.
SIMATIC RF120C
Operating Instructions, 02/2021, C79000-G8976-C328-03
Configuration and parameter assignment
4.4 Programming via SIMATIC controller
25
Advertisement
Table of Contents
