Appendix E - System Events - Graco HFR Setup

Appendix E - System Events

Event Code and
String Triggers
EAA0-R: Prepoly While in night mode, the prepoly
Refresh Started refresh started.
EA0-R: Night Mode While in night mode the system has
Recirc On automatically entered a low circulation
mode and attempted to turn on all
enabled conditioning zones.
EA00-R: Disp. A dispense has occurred of the given
Occurred (Shot #) shot number.
EBA0-R: Prepoly While in night mode, the prepoly
Refresh Complete refresh completed successfully.
EB00-R: Stop Button The Red stop button was pressed on
Pressed the Advanced Display Module.
EBR0-R: Night Mode While in night mode the system has
Recirc Off automatically stopped the low circula-
tion mode and turned off all condition-
ing zones.
ECA1-R: Red Mate- The Red materials specific gravity was
rial SG Modified modified.
ECB2-R: Blue Mate- The Blue materials specific gravity
rial SG Modified was modified.
ECC1-R: Cavitation User has turned ON the Cavitation
Errors On Error Generation logic (default, and
recommended state for production
use) using the ADM module or Field
Bus interface.
ECC0-R: Cavitation User has turned OFF the Cavitation
Errors Off Error Generation logic (NOT
recommended for production use)
using the ADM module or Field Bus
interface. If turned OFF, and an HFR
pump does not completely fill, the
error will NOT be generated and the
ratio of the 2 materials may be correct.
This event will also be generated if set
when the HFR (or NVH) product
powers up.
ECD0-R: Mixer Motor User has activated function (Pressed
Disabled for Dispense
"
effects on future dispenses.
ECD1-R: Mixer Motor User has re-enabled the mixer motor
Enabled for Dispense for dispensing.
ECF0-R: Mixer Air User has activated function (Pressed
OFF for Dispense
"
effects on future dispenses.
ECF1-R: Mixer Air User has re-enabled Air Nucleation for
Enabled for Dispense dispensing.
3A2797ZAA
" key) which may have negative
" key) which may have negative
Event Code and
String Triggers
ECGX: Dispense The rate (flow or pressure) or amount
Recipe Altered by has been altered by the controlling
PLC CGM/PLC interface when the system
was in shot mode.
ECH0-R: Learn Mode A learn mode calibration was success-
Executed fully completed.
EH00-R: Gel Timer The gel timer expired and the system
Dispense automatically took the gel shot.
EL00-R: System The System was powered on.
Powered On
EM00-R: System The System was powered off.
Powered Off
ENN0-R: Automatic The system was successfully charac-
Cal. Performed terized with the Automatic calibration.
ENC1-R: Cal. Point 1 A value for the first point in the three
Weight Entered point calibration was entered.
ENC2-R: Cal. Point 2 A value for the second point in the
Weight Entered three point calibration was entered.
ENC4-R: Cal. Point 1 The running average for point one of
Weight Erased the three point calibration was erased.
ENC5-R: Cal. Point 2 The running average for point two of
Weight Erased the three point calibration was erased.
END0-R: Ratio Check A ratio check shot was dispensed
Dispense from the ratio check calibration
screen.
EQU1-R: Settings The system settings were successfully
Downloaded transferred from the ADM to a USB
drive.
EQU3-R: Language The custom language file was suc-
Downloaded cessfully transferred from the ADM to
a USB drive.
EQU4-R: Language The custom language file was suc-
Uploaded cessfully transferred from the USB
drive to the ADM.
EQU5-R: Logs Down- The Error/Event and Shot data logs
loaded were successfully transferred from the
ADM to a USB drive.
ER01-R: Shot Count A counter from the shot counters
Reset maintenance page was erased
ER02-R: Seq. Posi- A counter from the sequence counters
tion Count Reset maintenance page was erased
ERA1-R: Red Material The resettable totalizer for the Red
Volume Reset material volume was reset to zero.
ERB1-R: Blue Mate- The resettable totalizer for the Blue
rial Volume Reset material volume was reset to zero.
ERA2-R: Red Material The resettable totalizer for the Red
Weight Reset material weight was reset to zero.
ERB2-R: Blue Mate- The resettable totalizer for the Blue
rial Weight Reset material weight was reset to zero.
ERA3-R: Red Cycle The resettable cycle counter for the
Count Reset Red pump was reset to zero.
Appendix E - System Events
89