Mounting A Repeater Unit - Omron SYSMAC CS1W-RPT01 Operation Manual

Unit Installation
CQM1H-series PLCs
3-2-2

Mounting a Repeater Unit

66
Only one Controller Link Unit can be connected in a CQM1H-series PLC.
Connect the Controller Link Unit to the left side of the CPU Unit and then con-
nect the Power Supply Unit to the left of the Controller Link Unit.
After the Units have been connected, secure them with the slide locks on the
top and bottom of the Units.
CPU Backplane
Power Supply Unit
3/5/10 slots
Expansion CPU
Backplane
11 slots
Note The CQM1H-CLK21 Controller Link Unit can be connected only to the
CQM1H-CPU51/61 CPU Unit. It cannot be connected to the CQM1H-CPU11/
21 CPU Unit.
Repeater Units can be either mounted on a DIN Track or screw-mounted.
CQM1H-CLK21
Controller Link Unit
CPU
Unit
CQM1H-CPU51/61
CPU Unit
Of these 14, 16,
or 21 slots,
installation is
possible in up
to 4 slots.
Section 3-2