Commands And Responses For Controller Link Units; Command Codes; Data Link Start; Data Link Stop - Omron SYSMAC CS1W-RPT01 Operation Manual

Commands and Responses for Controller Link Units

6-5 Commands and Responses for Controller Link Units
6-5-1

Command Codes

Command Data link operation mode
code
Active
04 01 Not valid
02 Valid
05 01 Valid
06 01 Valid
02 Valid
03 Valid
08 01 Valid
02 Valid
03 Valid
21 02 Valid
03 Valid
6-5-2

DATA LINK START

Command Block
Response Block
6-5-3

DATA LINK STOP

Command Block
204
Inactive
Valid DATA LINK START
Not valid DATA LINK STOP
Valid CONTROLLER DATA READ
Valid CONTROLLER STATUS READ
Valid NETWORK STATUS READ
Valid DATA LINK STATUS READ
Valid ECHOBACK TEST
Valid BROADCAST TEST RESULTS READ
Valid BROADCAST TEST DATA SEND
Valid ERROR LOG READ
Valid ERROR LOG CLEAR
Starts the Controller Link Network data links.
04 01
Command
code
04 01
Command Response
code code
The DATA LINK START command can be received for either automatically or
manually set data links. An error will occur if manually set data links are spec-
ified and yet data link tables do not exist.
The node that receives this command and starts the data links will become
the data link startup node. For automatically set data links, the data links will
be executed according to the settings at the startup node.
Stops the Controller Link Network data links.
04 02
Command
code
Name
Section 6-5
Page
204
204
205
206
208
210
212
212
213
213
214