What Is Network Interconnection; Interconnecting Controller Link Networks; Interconnecting Different Types Of Networks - Omron SYSMAC CS1W-RPT01 Operation Manual

What is Network Interconnection?

7-1 What is Network Interconnection?
7-1-1

Interconnecting Controller Link Networks

7-1-2

Interconnecting Different Types of Networks

Note
238
Network interconnection enables commands and responses for the message
service to be sent and received across multiple networks. The four networks
listed below can be interconnected to achieve this.
FA Networks
• SYSMAC NET Link Networks
• SYSMAC LINK Networks
• Controller Link Networks
OA Network
• Ethernet Networks
Controller Link Networks can be connected through a CS/CJ-series, CVM1,
or CV-series PLC.
Controller Link Network
CS/CJ-series,
C200HX/HG/HE, CVM1,
CV-series, or CQM1H PLC
Note A data bridge is created between Controller Link Units mounted
on the same CS/CJ-series, CVM1, or CV-series PLC.
A CS/CJ-series, CVM1, or CV-series PLC can be used to connect a Controller
Link Network with an Ethernet, SYSMAC NET, or SYSMAC LINK Network.
Controller Link Network
CS/CJ-series,
C200HX/HG/HE, CVM1,
CV-series, or CQM1H PLC
Note A data and communications protocol gateway is created between
a Controller Link Unit and an Ethernet, SYSMAC NET, or SYSMAC
LINK Unit mounted to the same CS/CJ-series, CVM1, or CV-series PLC.
1. A bridge is used between Communications Units to connect the same type
of networks.
2. A gateway is used between Communications Units to connect different
types of networks.
Controller Link Network
CS/CJ-series, CVM1, or
CV-series PLC (see note)
Ethernet Network
CS/CJ-series, CVM1, or
CV-series PLC (see note)
Section 7-1