Devices For Connection - Omron SYSMAC CS1W-RPT01 Operation Manual

Specifications and Configurations
1-2-5

Devices for Connection

Communications Cables
Repeater Units (when Required)
Item
Model CS1W-RPT01
External appearance
Supported Units/ All Controller Link Units/Boards for wired networks.
Boards
Note To construct a network that can contain up to 62 nodes, it is necessary to use CS1W-
Transmission line Twisted-pair cable
To set up a Controller Link Network, the following devices are needed in addi-
tion to a Controller Link Unit and a PLC.
The following shielded twisted-pair cables are recommended for Wired Con-
troller Link Network connections.
Model
Li2Y-FCY2 x 0.56 qmm
–
1 x 2 x AWG 20PE +
Tr.CUSN + PVC
#9207
ESVC 0.5 x 2 C-1362
ESNC 0.5 x 2 C-99-087B
ESPC 1P x 0.5 mm
Note Use the special connector provided with the Board to connect the Controller
Link Support Board to the network.
The following Repeater Units can be used to facilitate the use of T-Branch wir-
ing, long-distance wiring, and the addition or removal of nodes.
Three types of Repeater Unit are available for use with different transmission
line types (i.e., connection methods).
CLK23, CS1W-CLK21-V1, CJ1W-CLK23, CJ1W-CLK21-V1, 3G8F7-CLK23-E, and 3G8F7-
CLK21-EV1 models, which support 62 nodes.
Manufacturer
Kromberg & Schubert,
Komtec Department
Draka Cables Industrial
Belden
Bando Densen Co.
Nihon Electric Wire &
Cable Co.
2 Nagaoka Electric Wire
Co., Ltd.
Specifications
CS1W-RPT02
H-PCF cable (optical
two-core cable)
Section 1-2
Remarks
German company
Spanish company
USA company
Japanese company
Japanese company
Japanese company
CS1W-RPT03
GI cable (optical two-
core cable; 62.5/125 µm,
50/125 µm)
21