Installing In Windows 95 Or Windows Nt 4.0 - Epson STYLUS PRO 5000 Setup Manual

Installing in Windows 95 or Windows NT 4.0

If you connect the printer directly to your computer, follow
the steps below to install the printer software in Windows 95
or NT 4.0. If you plan to use your printer over a network with
Windows 95, see also page 2-16, "Using your printer on a
network with Windows 95." If you use Windows NT 4.0 and
plan to use your printer over a network, you need to install
the printer software according to the instructions on page 2-18
"Installing in Windows NT 4.0 for use on a network."
Note:
Printer driver installation may require network administration
privileges. Ask your network administrator for more details.
1. Make sure Windows 95 or NT 4.0 is running and the printer
is off.
2. Insert the printer software CD shipped with your printer in the
CD-ROM drive. If the dialog box below appears, click Install
and go to step 3. If this dialog box does not appear, double-click
the My Computer icon, and then double-click the CD-ROM
drive. If the dialog box below appears, click Install and go to
step 3. If this dialog box still does not appear, double-click the
Setup.exe icon and go to step 3. You may have to scroll
through the folder using the arrows on the right to find the icon.
Note:
If you are using the floppy disk version of the printer software,
double-click the My Computer icon, double-click the floppy
disk icon, click the Setup.exe icon, and go to step 3.
2-11
Getting Started
2