For Windows Xp, 2000 And Nt 4.0 Users - Epson Stylus PHOTO 950 User Manual

Note:
To monitor the status of a shared printer, you must install EPSON
Status Monitor 3 on each computer that will access the printer. See
"Installing EPSON Status Monitor 3" on page 253 for
instructions.
Installing EPSON Status Monitor 3
To monitor the status of a printer accessed through a network,
you must install EPSON Status Monitor 3 on each computer that
will access the printer. Follow the steps below.
1. Insert the printer software CD in the CD-ROM drive. If the
Installer dialog box does not appear, double-click SETUP.EXE
in the CD-ROM.
2. Select Install EPSON Status Monitor 3, and click
3. Follow the on-screen instructions.

For Windows XP, 2000 and NT 4.0 Users

This section tells you how to set up your printer so that other
computers on the network can use it.
Note:
This section is written for small network users only. If you are on a
large network and would like to share your printer, consult your
network administrator.
To install software programs in Windows 2000/NT 4.0, it is
necessary to log on as a user with administrative privileges (a user
who belongs to the Administrators group).
253
Setting Up Your Printer on a Network
.