Epsonnet Config (Web Version); Starting Epsonnet Config (Web Version) - Epson TM-P60II Technical Reference Manual

For receipt models

Hide thumbs Also See for TM-P60II:

Table of Contents

EpsonNet Config (Web Version)

EpsonNet Config (Web version) is a utility to configure the network and other settings on a web browser.

Follow the steps below to start up EpsonNet Config (web version).

Start up a PC connected to the network.

Start up the web browser and input the printer's IP address (http://printer's IP

address) in the address bar as shown below.

 You can check the printer's IP address from the dynamic status sheet or in self-test mode. For

 A user name and a password will be required on the authentication screen. Enter "epson" for

 In the initial setting, a warning message for authentication may appear when you access

EpsonNet Config starts.

http://xxx.xxx.xxx.xxx

details on printing the dynamic status sheet, see

58. For details on the self-test mode, see

both the user name and the password. You can change the password with [Password] in the

Optional configuration menu.

EpsonNet Config (web version) from a browser.

"Dynamic Status Sheet Print Mode" on page

"Self-test mode" on page

49.

Table of Contents