Show Commands - Nokia 7210 Configuration Manual

CLI Usage
Description This command displays timestamps in the CLI session.
2.9.2.3
alias
Syntax alias
Context <root>
Platforms Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description This command shows a list of existing aliases.
Output The following output is an example of alias information, and
fields.
Sample Output
A:ALA-103>config>system# show alias
==============================================================================
Alias-Name
==============================================================================
sri
sse
ssvpls
ssi
------------------------------------------------------------------------------
Number of aliases : 5
==============================================================================
A:ALA-103>config>system#
Table 15
74

Show Commands

Output Fields: Alias
Label
Alias-Name
Alias-command-name
Number of aliases
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Alias-command-name
show router interface
show service service-using epipe
show service service-using vpls
show service service-using ies
Description
Displays the name of the alias
The command and parameter syntax that define the alias
The total number of aliases configured on the router
© 2021 Nokia.
Configuration Guide
Table 15 describes the output
3HE 17358 AAAB TQZZA