Entering Numerical Ranges - Nokia 7210 Configuration Manual

Service access switch 7210 sas-m, t, r6, r12, mxp, sx, s basic system
Hide thumbs Also See for 7210:
Table of Contents

Advertisement

CLI Usage

2.7.6 Entering Numerical Ranges

The 7210 SAS CLI allows the use of a single numerical range as an argument in the
command line. A range in a CLI command is limited to positive integers and is
denoted with two numbers enclosed in square brackets with two periods ("..")
between the numbers:
where x and y are positive integers and y-x is less than 1000.
For example, it is possible to shut down ports 1 through 10 in Slot 1 on MDA 1. A port
is denoted with "slot/mda/port", where slot is the slot number, mda is the MDA
number and port is the port number. To shut down ports 1 through 10 on Slot 1 and
MDA 1, the command is entered as follows:
configure port 1/1/[1..10] shutdown
<Ctrl-C> can be used to abort the execution of a range command.
Specifying a range in the CLI does have limitations. These limitations are described
in
CLI Range Use Limitations
Table 12
Limitation
Only a single range can be specified.
Ranges within quotation marks are
interpreted literally.
38
Table
12.
Description
It is not possible to shut down ports 1 through 10 on MDA 1 and MDA
2, as the command would look like
configure port 1/[1..2]/[1..10]
and requires two ranges in the command, [1..2] for the MDA and [1..10]
for the port number.
In the CLI, enclosing a string in quotation marks ("string") causes the
string to be treated literally and as a single parameter. For example,
several commands in the CLI allow the configuration of a descriptive
string. If the string is more than one word and includes spaces, it must
be enclosed in quotation marks. A range that is enclosed in quotes is
also treated literally. For example,
configure router interface "A[1..10]" no shutdown
creates a single router interface with the name "A[1..10]". However, a
command such as:
configure router interface A[1..10] no shutdown
creates 10 interfaces with names A1, A2 .. A10.
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
© 2021 Nokia.
Configuration Guide
3HE 17358 AAAB TQZZA

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7210 sas-mxp7210 r67210 r127210 s7210 sx7210 t

Table of Contents