System Information - Nokia 7210 Configuration Manual

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
6.11.3.1
This section describes the basic system information parameters to configure the
physical location of the router, contact information, location information for the router
such as an address, floor, and room number, global positioning system (GPS)
coordinates, and system name.
Use the CLI syntax displayed in this section to configure the following system
components:
6.11.3.1.1
This section describes the system information parameters.
General system parameters include:
Name
Use the system name command to configure a name for the device. The name is
used in the prompt string. Only one system name can be configured. If multiple
system names are configured, the last one encountered overwrites the previous
entry.
Use the following CLI syntax to configure the system name.
CLI Syntax:
Example:
The following is a sample configuration for the system name command.
sysName@domain>config>system# info
3HE 17358 AAAB TQZZA

System Information

• System Information Parameters
• System Time Elements
System Information Parameters
• Name
• Contact
• Location
• CLLI Code
• Coordinates
config>system
name <system-name>
config>system# name ALA-12
Use subject to Terms available at: www.nokia.com
© 2021 Nokia.
System Management
321