Initial System Startup Process Flow; Configuration Notes - Nokia 7210 Configuration Manual

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
Note: Access to a console is only disabled when the TiMOS image is loaded. Console
access remains unchanged during the boot loader stage of the boot up process. That is, the
bof command takes effect only when the node is booted with the TiMOS image.

4.8 Initial System Startup Process Flow

Figure 10
boot loader and BOF image and configuration files are successfully located.
Figure 10

4.9 Configuration Notes

This section describes BOF configuration guidelines.
3HE 17358 AAAB TQZZA
shows the process to start your system. This example assumes that the
System Startup Process Flow
Establish router connection (console port)
Configure/modify BOF file locations
• The loading sequence is based on the order in which the sequence is placed in
the configuration file. It is loaded as it is read during bootup.
Use subject to Terms available at: www.nokia.com
Start
Power cycle router
boot.tim files found
BOF files found
Save config changes
© 2021 Nokia.
Boot Options
Primary image
Primary config
Secondary image
Secondary config
Tertiary image
Tertiary config
sw0534
153