System Synchronization Commands For 7210 Sas-R6 And 7210 Sas-R12; System Synchronization Commands For 7210 Sas-Sx 1/10Ge, 7210 Sas-S 1/10Ge, And 7210 Sas-Sx 10/100Ge - Nokia 7210 Configuration Manual

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
6.12.1.18
config
6.12.1.19
config
3HE 17358 AAAB TQZZA
System Synchronization Commands for 7210 SAS-R6 and
7210 SAS-R12
— system
— sync-if-timing
— abort
— begin
— bits1
— input
— no shutdown
— shutdown
— interface-type
— no interface-type
— output
— line-length
— no shutdown
— shutdown
— no ql-override
— ql-override
— ssm-bit
sa-bit
— commit
— ref-order first second [third] [fourth]
— no ref-order
— ptp
— ql-override
— no ql-override
— [no] shutdown
— ref1
— ql-override
— no ql-override
— [no] shutdown
— source-port
— no source-port
— ref2
— ql-override
— no ql-override
— [no] shutdown
— source-port
— no source-port
— [no] ql-selection
— [no] revert
System Synchronization Commands for 7210 SAS-Sx 1/
10GE, 7210 SAS-S 1/10GE, and 7210 SAS-Sx 10/100GE
— system
— sync-if-timing
Use subject to Terms available at: www.nokia.com
{ds1 [{esf | sf}] | e1 [{pcm30crc | pcm31crc}]}
{110 | 220 | 330 | 440 | 550 | 660}
{prs | stu | st2 | tnc | st3e | st3 | prc | ssua | ssub | sec}
{prs | stu | st2 | tnc | st3e | st3 | prc | ssua | ssub | sec}
{prs | stu | st2 | tnc | st3e | st3 | prc | ssua | ssub | sec | eec1 | eec2}
port-id
{prs | stu | st2 | tnc | st3e | st3 | prc | ssua | ssub | sec | eec1 | eec2}
port-id
© 2021 Nokia.
System Management
379