Nokia 7210 Configuration Manual page 455

Service access switch 7210 sas-m, t, r6, r12, mxp, sx, s basic system
Hide thumbs Also See for 7210:
Table of Contents

Advertisement

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
time-range time-range-name — Specifies a name for the time-range, up to 32
priority priority — Specifies the priority of the time-range. Only one time-range
mac mac-filter-id — Specifies a MAC filter for this tod-suite.
qos
Syntax
qos policy-id [time-range time-range-name] [priority priority]
no qos policy-id [time-range time-range-name]
Context
config>system>cron>tod-suite>ingress
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description
This command creates time-range based associations of previously created QoS policies.
Multiple policies may be included and each must be assigned a different priority; in case time-
ranges overlap, the priority will be used to determine the prevailing policy. Only a single
reference to a policy may be included without a time-range.
The no form of this command reverts to the default.
Parameters
policy-id — Specifies an egress QoS policy for this tod-suite.
time-range time-range-name — Specifies a name for the time-range, up to 32
priority priority — Specifies the priority of the time-range. Only one time-range
3HE 17358 AAAB TQZZA
characters. If the time-range is not populated the system will assume the assignment
to mean "all times". Only one entry without a time-range is allowed for every type of
policy. The system does not allow the user to specify more than one policy with the
same time-range and priority.
assignment of the same type and priority is allowed.
Values
1 to 10
Values
1 to 65535
Values
1 to 65535
characters. If the time-range is not populated the system will assume the assignment
to mean "all times". Only one entry without a time-range is allowed for every type of
policy. The system does not allow the user to specify more than one policy with the
same time-range and priority.
Default
"NO-TIME-RANGE" policy
assignment of the same type and priority is allowed.
Values
1 to 10
Default
5
Use subject to Terms available at: www.nokia.com
© 2021 Nokia.
System Management
455

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7210 sas-mxp7210 r67210 r127210 s7210 sx7210 t

Table of Contents