Oob Ethernet Management Port; Ipv6 Configuration Guidelines In Oob Node Management; Security For Console Port And Ethernet Management Port - Nokia 7210 Configuration Manual

Boot Options

4.6 OOB Ethernet Management Port

The 7210 SAS platforms support the OOB Ethernet management port for
management of the node. An OOB Ethernet port can be used to download the
TiMOS image file and the configuration file by creating a BOF manually. The OOB
management port allows for use of both IPv4 and IPv6. See
Guidelines in OOB Node Management
IPv6 for the OOB management port.
Refer to the 7210 SAS OS Software Release Notes 11.0Rx for information about the
specific software release that supports OOB management port and IPv6.
4.6.1 IPv6 Configuration Guidelines in OOB Node
The following are the configuration guidelines for IPv6 on an OOB management port
of the node.
4.7 Security for Console Port and Ethernet
The 7210 SAS OS supports disabling the console port and OOB Ethernet
management port. In remote deployments, operators can choose to disable user
access to the node through the console and through the Ethernet management port
to prevent unauthorized and malicious access. Use the bof>console-disabled
command to disable the console and the bof>eth-mgmt-disabled command to
disable the use of the Ethernet management port.
152
Management
• The management port on the management router instance only supports host
functionality.
• It is required that an IPv4 address is configured in the BOF. A BOF that contains
only IPv6 addresses is not supported.
• IPv6 duplicate address detection is not supported.
• IPv6 auto-configuration is not supported.
• IPv6 over IPv4 tunneling is not supported.
• IPv6 path MTU discovery is not supported.
• The router discovery option is not supported on the management port.
Management Port
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
for information about platforms that support
© 2021 Nokia.
Configuration Guide
IPv6 Configuration
3HE 17358 AAAB TQZZA