Nokia 7210 Configuration Manual page 341

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
===============================================================================
Name
Triggers
Status
Periodic
Weekly
The weekly command configures the start and end of a periodic schedule for the
same day every week, for example, every Friday. The start and end dates must be
the same. The resolution must be at least one minute apart, for example, start at
11:00 and end at 11:01. A start time and end time of 11:00 is invalid.
Use the following syntax to configure a time range that is repeated weekly.
CLI Syntax:
The following example shows the command usage to create a time range is repeated
weekly.
Example:
The following is a sample configuration output of a weekly time range beginning on
Friday at 1:01am ending Friday at 1:02am.
A:sim1>config>system>cron>time-range$ info
----------------------------------------------
----------------------------------------------
A:sim1>config>system>cron>time-range$
Time of Day
Time of Day (TOD) suites are useful when configuring many types of time-based
policies or when a large number of subscribers or SAPs require the same type of
TOD changes. The TOD suite may be configured while using specific ingress or
egress ACLs or QoS policies, and is an enhancement of the ingress and egress CLI
trees.
Time of day elements include:
3HE 17358 AAAB TQZZA
: 1
: 0
: Inactive
: weekend Start 11:00 End 12:00
config>system>cron>time-range$
weekly start time-in-week end time-in-week
config>system>cron>time-range$ start fri,01:01 end
fri,01:02
config>system>cron>time-range$
weekly start fri,01:01 end fri,01:02
• SAPs
Use subject to Terms available at: www.nokia.com
© 2021 Nokia.
System Management
341