Document Structure And Content; 7210 Sas Modes Of Operation - Nokia 7210 Configuration Manual

Service access switch 7210 sas-m, t, r6, r12, mxp, sx, s basic system
Hide thumbs Also See for 7210:
Table of Contents

Advertisement

Getting Started

1.1.1 Document Structure and Content

This guide uses the following structure to describe features and configuration
content.
Note: This guide generically covers Release 21.x.Rx content and may include some
content that will be released in later maintenance loads. Refer to the 7210 SAS Software
Release Notes 21.x.Rx, part number 3HE 17379 000x TQZZA, for information about
features supported in each load of the Release 21.x.Rx software.

1.2 7210 SAS Modes of Operation

Unless explicitly noted, the phrase "mode of operation" and "operating mode" refers
to the current operating mode of the 7210 SAS router. Each operating mode provides
configuration access to a specific group of CLI commands.
Note: Not all CLI commands are supported on all 7210 SAS platforms in all modes of
operation. Users can only configure CLI commands supported by the current operating
mode of the router. Refer to the 7210 SAS Software Release Notes 21.x.Rx, part number
3HE 17379 000x TQZZA, and to the appropriate 7210 SAS software user guide for
information about features and capabilities supported by a 7210 SAS platform when
operating in a specific mode.
The following modes of operation are supported by the 7210 SAS product family.
18
• This guide is organized into functional chapters and provides concepts and
descriptions of the implementation flow. Each chapter describes a software area
and provides CLI syntax and command usage to configure parameters for the
functional area.
• Command outputs shown in this guide are examples only; actual displays may
differ depending on supported functionality and user configuration.
• Refer to the 7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System Configuration
Guide for boot options to configure the
Refer to the 7750 SR software user guides for information about service and
protocol provisioning, and operating the 7210 SAS router in
• Unless explicitly noted, the CLI commands and their configuration is similar for
both
network
and
access-uplink
modes of operation.
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
satellite
operating modes for features applicable to both
© 2021 Nokia.
Configuration Guide
mode of operation on the router.
satellite
3HE 17358 AAAB TQZZA
mode.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7210 sas-mxp7210 r67210 r127210 s7210 sx7210 t

Table of Contents