Table 61 Number Of Resources Available For Qos-Sap-Ingress-Resource - Nokia 7210 Configuration Manual

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
If no resources are allocated for use, the software fails all attempts to associate a service
entity (for example, SAP and IP interface) with a SAP ingress QoS policy using any of the
match criteria.)
The no form of this command specifies that the software does not allocate any resources for
use by SAP ingress QoS policies.
Parameters num-resources — Specifies the amount of resources that can be allocated for use by
Table 61
3HE 17358 AAAB TQZZA
SAP ingress QoS policies.
If the user specifies def, the software allocates the default amount of resources
based on the 7210 SAS platform. On 7210 SAS-R6 and 7210 SAS-R12, the amount
of default resources allocated also varies based on the IMM plugged into the slot.
Values Table 61
def keyword on different 7210 SAS platforms and on different IMM
types.
Number of Resources Available for QoS-SAP-Ingress-Resource
Platforms
7210 SAS-M (per node)
7210 SAS-T Access-uplink mode (per
node)
7210 SAS-T Network Mode (per node)
7210 SAS-R6 (per IMMv1)
7210 SAS-R6 and 7210 SAS-R12 (per
IMMv2)
7210 SAS-R6 and 7210 SAS-R12 (per
IMM-c)
7210 SAS-Mxp (per node)
7210 SAS-Sx 1/10GE (per node)
(standalone)
7210 SAS-Sx 1/10GE (standalone-VC)
7210 SAS-S 1/10GE (per node)
(standalone)
7210 SAS-S 1/10GE (standalone-VC)
7210 SAS-Sx 10/100GE (per node)
Use subject to Terms available at: www.nokia.com
lists the parameter values and provides the values used for
Min value
(per node)
0
0
0
0
0
0
0
0
0
0
0
0
© 2021 Nokia.
System Management
Max value (per Default
node) Values
10 5
7 4
6 3
7 3
12 5
10 4
10 5
7 4
6 4
7 4
6 4
3 3
557