Nokia 7210 Configuration Manual page 410

System Management
Parameters card-type — Specifies an identifier used to match the configured slot module with the
shutdown
Syntax [no] shutdown
Context config>system>vwm-shelf>card
Platforms 7210 SAS-M (network and access-uplink), 7210 SAS-T (network and access-uplink),
7210 SAS-Mxp, 7210 SAS-R6 and 7210 SAS-R12
Description This command allows the user to administratively disable the management of a specific
module inserted in a slot on the clip-on device. When this command is executed, the
7210 SAS software clears all pending events/traps/alarms/LED related to this card.
The no form of this command allows the user to administratively enable the management of
the card on the clip-on device. The software raises appropriate events/traps/alarms for the
card.
Default no shutdown
6.12.2.1.3
vc-stack
Syntax vc-stack
Context config>system
410
equipped slot module. Table 42
be used to identify the supported modules usable with the clip-on device.
Values SFC1A, SFC1B, SFC1C, SFC1D, SFC1E, SFC1F, SFC1G, SFC1H,
SFC2A&B, SFC2C&D, SFC2E&F, SFC2G&H, SFC4A-D, SFC4E-H,
SFC8 (CWDM)
ANY, EALPFG SFD8A_R, SFD8B_R, SFD8C_R, SFD8D_R,
SFD4A_R, SFD4B_R, SFD4C_R, SFD4D_R, SFD4E_R,
SFD4F_R, SFD4G_R, SFD4H_R, SFD2A_R, SFD2B_R,
SFD2C_R, SFD2D_R, SFD2E_R, SFD2F_R, SFD2G_R,
SFD2H_R,SFD2I_R, SFD2L_R, SFD2M_R, SFD2N_R, SFD2O_R,
SFD2P_R, SFD2Q_R, SFD2R_R, SFD8A, SFD8B, SFD8C,
SFD8D, SFD4A, SFD4B, SFD4C, SFD4D, SFD4E, SFD4F, SFD4G,
SFD4H, SFD2A, SFD2B, SFD2C, SFD2D, SFD2E, SFD2F, SFD2G,
SFD2H, SFD2I, SFD2L, SFD2M, SFD2N, SFD2O, SFD2P, SFD2Q,
SFD2R (DWDM)
ascii-string — Can use ASCII alphabets or numbers. Valid card-type
acronyms are listed in the
Virtual Chassis (VC) Configuration Commands
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
and Table 43 provides the list of acronyms that can
Table 43.
© 2021 Nokia.
Configuration Guide
3HE 17358 AAAB TQZZA