Procedure To Boot In The Standalone-Vc Mode - Nokia 7210 Configuration Manual

Appendix: 7210 SAS Boot Procedures

7.5 Procedure to Boot in the Standalone-VC Mode

Note:
Perform the following steps to boot the 7210 SAS device in the standalone-VC mode
of operation.
Step 1. Power on the 7210 SAS device.
Step 2. Use the OOB Ethernet management port to boot form the network.
A:NS1722T0086# admin reboot now
Resetting...OK
Nokia SAS-S 7210 Boot ROM. Copyright 2000-2018 Nokia.
All rights reserved. All use is subject to applicable license agreements.
Build: X-11.0.B1-6 on Thu Dec 6 15:22:31 IST 2018 by sasbuild
Version: 0x1F
DRAM test first stage
?Boot rom version is v31
CPLD Version: 0x0C
Board Serial Number is 'NS1722T0086'
DRAM test second stage
>>>Testing
>>>Testing
714
Serial number
Manufacture date
Manufacturing deviations
Manufacturing assembly number :
Administrative state
Operational state
Temperature
Temperature threshold
Software boot (rom) version
Software version
Time of last boot
Current alarm state
Base MAC address
• This procedure is only supported on the 7210 SAS-S 1/10GE, 7210 SAS-Sx 1/10GE,
and their variants.
• See Provisioning and Booting Up the VC in Standalone Mode
SDRAM from 0x0000000002200000 to 0x0000000080000000
SDRAM from 0xffffffffe0000000 to 0xffffffffe2000000
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
: NS1734T0028
: 09182017
: (Not Specified)
: up
: up
: 48C
: 85C
: X-11.0.R4 on Wed Jul 10 13:44:15 IST 2019
by sasbuild
: TiMOS-B-20.3.B1-3 both/hops Nokia SAS-Sx
64SFP+4QSFP28 7210 Copyright (c) 2000-2020
Nokia.
All rights reserved. All use subject to
applicable license agreements.
Built on Fri Mar 20 16:50:24 IST 2020 by
sasbuild in /home/sasbuild/20.3B1/panos/ma
: 2019/11/14 13:16:39
: alarm cleared
: d0:99:d5:a6:34:41
© 2021 Nokia.
Configuration Guide
for more information.
3HE 17358 AAAB TQZZA