Nokia 7210 Configuration Manual page 501

Service access switch 7210 sas-m, t, r6, r12, mxp, sx, s basic system
Hide thumbs Also See for 7210:
Table of Contents

Advertisement

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
Parameters
authentication-key — Specifies the authentication key. Allowed values are any string up
hash-key — Specifies the hash key. The key can be any combination of ASCII characters
hash — Specifies that the key is entered in an encrypted form. If the hash or hash2
hash2 — Specifies that the key is entered in a more complex encrypted form that
6.12.2.1.15
mc-lag
Syntax
[no] mc-lag
Context
config>redundancy>multi-chassis>peer>mc-lag
Platforms
Supported on all 7210 SAS platforms as described in this document
Description
Commands in this context configure multi-chassis LAG operations and related parameters.
The no form of this command administratively disables multi-chassis LAG. MC-LAG can only
be issued only when mc-lag is shutdown.
hold-on-neighbor-failure
Syntax
hold-on-neighbor-failure multiplier
no hold-on-neighbor-failure
Context
config>redundancy>multi-chassis>peer>mc-lag
Platforms
Supported on all 7210 SAS platforms as described in this document
3HE 17358 AAAB TQZZA
to 20 characters composed of printable, 7-bit ASCII characters. If the string contains
special characters (#, $, spaces, and so on), the entire string must be enclosed within
double quotes.
up to 33 (hash1-key) or 55 (hash2-key) characters (encrypted). If spaces are used in
the string, the entire string must be enclosed within double quotes.
parameter is not used, the key is assumed to be in a non-encrypted, clear text form.
For security, all keys are stored in encrypted form in the configuration file with the
hash or hash2 parameter specified.
involves more variables then the key value alone, this means that hash2 encrypted
variable cannot be copied and pasted. If the hash or hash2 parameter is not used,
the key is assumed to be in a non-encrypted, clear text form. For security, all keys
are stored in encrypted form in the configuration file with the hash or hash2
parameter specified.
MC-LAG Commands
Use subject to Terms available at: www.nokia.com
© 2021 Nokia.
System Management
501

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7210 sas-mxp7210 r67210 r127210 s7210 sx7210 t

Table of Contents