Uploading A Vt Pro-E Project - Crestron TPS-G-TPI Operation Manual

G-Series Touchpanel Interface
®
52 ¥ Isys G-Series Touchpanel Interface: TPS-G-TPI
6. Click the Browse button to locate a compiled (.spz) program.
"Open" Window
7. Select a file and click Open. When the "SIMPL Program" window re-opens
click Send.

Uploading a VT Pro-e Project

The VT Pro-e file can be uploaded to the interface using VT Pro-e or via the
Crestron Toolbox. If uploading to a touchpanel or interface that has an external
compact flash slot, Crestron Toolbox should be used. The TPS-G-TPI interface
source file has the extension .vtp. A compiled VT Pro-e file has the extension .vtz.
CAUTION: Verify that any compact flash used either contains no files or only
contains files you want loaded to the interface prior to inserting into the interface.
When unknown files reside on the compact flash, existing files on the interface may
be overridden or erased if the interface reboots.
NOTE: The current suggested maximum project size is 170MB or less. Projects
larger than this may load without error, but may not display correctly.
Upload via VT Pro-e
Please use Crestron Toolbox. VT Pro-e does not properly support the more
advanced file system of the TPS-G-TPI interface.
Upload via Crestron Toolbox
1. Verify that the procedure for "Establishing Communications" that begins on
page 41 has been performed to establish a connection between the PC and
the interface.
2. Open Crestron Toolbox.
3. Select Tools | System Info. Click on the Address Book icon and select the
desired connection and click OK. The "System Info" window will display
the connection information.
®
Crestron Isys TPS-G-TPI
Operations Guide – DOC. 6445